PROCAP AV
Spray etch gel for austenitic steels (e.g. duplex and super duplex). PROCAP AV spray gel replaces favorably the etching bath of non-submerged equipment (large surfaces, multi-material, etc...).
Usage:
Before using PROCAP AV , read the safety data sheet and observe health and safety rules.
Before use, shake the container to obtain a uniform consistency. The gel can be mixed with a colorant, which will allow the product to be evenly applied to the surface and will reduce nitrogen gases. The gel is applied to a previously degreased surface with an acid-resistant hand or pneumatic pump. During the etching process, the gel should not be allowed to dry out when exposed to sunlight or other heat sources. After the etching is completed, the surface should be thoroughly rinsed with plenty of cold water at a pressure of about 150 bar.Translated with www.DeepL.com/Translator (free version)
PROCAP AV provides active and uniform etching of austenitic stainless steel and steels formed on the basis of nickel and chromium. Capacity 1kg = 3-5 m2
