TURBO Z - Etching paste
High-quality paste for etching welds and heated areas on stainless and acid-resistant steel. Does not contain hydrochloric acid and chlorides. The product is colorless, highly viscous and ready for application.
Advantages are:
high efficiency (1 kg is sufficient to cover about 200mb of weld)
strong and effective action
short reaction time and easy rinsing
good for application on vertical surfaces
high thixotropy, DOES NOT DRY
Usage:
Before application, read the safety data sheet and observe the rules of health and safety.
Before use, shake the container to obtain a uniform consistency. The gel can be mixed with a colorant, which will allow the product to be evenly applied to the surface and will reduce nitrogen gases. The gel is applied to a previously degreased surface with an acid-resistant hand or pneumatic pump. During the etching process, the gel should not be allowed to dry out when exposed to sunlight or other heat sources. After the etching is completed, the surface should be thoroughly rinsed with plenty of cold water at a pressure of about 150 bar.
TURBOZ paste is designed to remove discoloration of the material after welding, scale after rolling, iron embedded in the material, etc., as such impurities significantly reduce corrosion resistance. It removes foreign particles on stainless steel that have appeared during mechanical and/or thermal processes such as bending, hardening, cutting and welding. These particles can be iron particles and iron oxides/hydroxides, nickel oxides, etc.
After application, the etched areas become clean, bright and dull.